According to mohnish mohan mukkar in today’s world, maintenance and neglecting can determine the life of your tyres. It’s quite tough to take care of your each & every part of your vehicle to maintain the performance or extend the life of your one of the most valuable assets. Neglecting the maintenance of your car tyres can be very costly.
Pay attention to these key areas to save on its replacement instead of keeping an eye on your vehicle’s performance and checking other parts. According to the experts, tyre maintenance is not a rocket science; it’s just a set of basic rules which are easy to follow for extending their life.
Know the inflation level
You better know the inflation level which is the biggest influence on tyre life. They are designed to run at a specific pressure. So gather the information on your exact axle load or refer to a tyre load chart. These are available online as well so that you can make the adjustments accordingly.
Join a good inflation maintenance program
It’s better if you can join a good tyre maintenance program which is quite difficult as they naturally lose air. Small punctures or valve caps may encourage the leakage. Make sure you check your tyres on a regular basis or once in a week to look if there is a rapid leak.
Reduce your driving speed
By the mohnish mohan mukkar it always recommends to control your driving speed because the high speed generates more heat and accelerate tyre wear. The average speed between 55 mph to 75 mph can reduce the total treads mileage by 20% so make sure you keep the speed approx 55mph to increase the mileage.
Keep your vehicles well-aligned
Poor vehicle alignment is the major reason of the uncertain wears. Unexpected tread wear would appear on parts of the tyres if they don’t run straight ahead. The vehicle should be properly aligned so it’s better you start a serious alignment program which may increase the tyre mileage by 30%.
Mount it correctly
Its better you watch the performance of your car tyres. You will have to watch that your tyres are mounted or match-mounted to the wheel correctly. The high spot may vary one tyre to another so watch this mark when you mount the tyres. It’s better if you take the high spot to match it to the low spot of the wheel.
Check & replace a wheel on time
You need to check the wheels and suspension components on time so that you can replace these hidden enemies of your tyres. If your wheel bearing is not torqued properly, it may cause irregular wear. Worn shock absorbers may cause depression wear on treads and an early trip to the scrap pile. Don’t wait for the suspension components to be broken or for any leakage. It’s better if you can replace shock absorbers and other suspension components.
Mohnish Mohan Mukkar wants to tell you that intelligent tyre rotation is quite important to promote even tread wear and add a lot of extra miles in tread life. It’s better if you rotate drive tyres between forward and back positions once in a few months to even out wear. Rear tyres will wear quicker than the forward positions so, it’s better if you emphasize on intelligent tyre rotation.